PP PE WPC wood plastic composite wall panel cladding making machine
Tongsan is professional for the WPC turnkey production plant, with experienced low cost formulation, reasonable and advanced machine design, strong technical team, oversea engineer service.
Tongsan Wood Plastic WPC machine is developed for using recycled PP/PE plastic mixing with agriculture wastage(such as wood sawdust, rice husk, rice straw, wheat straw) to make eco-friendly construction products, the max. wood percentage can be 70%.
The Wood Plastic WPC machine is used for making WPC profiles by Wood and Plastic composition, such as WPC decking, WPC wall cladding, WPC fencing, WPC pergola, WPC post, etc...
1, WPC granulation machine
After get ready wood powder and recycled PP/PE plastic, the first step is mixing them with chemicals, then use WPC granulation machine to make WPC granules
SHMS series granulating machine is used for making WPC pellets. The WPC pellets produced by WPC granulating machine can used for making WPC product using WPC machine.The granulating machine consists of parallel double-screw extruder,water cooling system, a granulator and air conveyor cooling system.The feeder and hopper are equipped with mixer to prevent the material blocked up.If customer do not have strict requirements about the appearance of pellets, the granulator can be removed.The pellets extrude by extruder directly, then go for crusher. Can improve the production capacity.
Model | L/D ratio | Max.capacity | Motor power | Suitable material | Max.rotating speed | Wood powder percentage |
SHMS-65 | 40:1 | 200-220kg/h | 75kw | Pe+wood powder | 500r/min | ≤75% |
SHMS-75 | 40:1 | 300-350kg/h | 90kw | Pe+wood powder | 500r/min | ≤75% |
SHMS-90 | 40:1 | 500-600kg/h | 132kw | Pe+wood powder | 500r/min | ≤75% |
2, PE WPC wall panel cladding profile extrusion line
Material: recycled 30% PP/PE+70% wood powder+chemical additives.
Product: WPC decking, WPC wall cladding, WPC fence, WPC pergola..
The WPC profile extrusion line can make WPC granules into WPC products by equipping required mold, we can equip co-extrusion system and online 3D embossing device for making WPC products in high quality with wooden grain, the line also equipped with online cutting device.
Model | HGMSE-65 | HGMSE-80 |
Extruder model | SJMS65/132 | SJMS 80/156 |
Motor power | 37kw | 75kw |
Mac.Extrusion capacity | 140-160kg/h | 220-250kg/h |
Co-extruder(Optional) | SJ35/28 | SJ45/28 |
3, PVC WPC profile machine:
Material: 50%PVC+20% wood+20% caco3+ Chemical additives.
Product: WPC door frame, WPC wall panel, WPC decoration profiles indoor.
Model | Profile Width | Extruder model | Motor power | Max.extrusion capacity | Calibrating platform length |
HGMSC-200 | 200mm | 51/105 | 22kw | 100-120kg/h | 4000mm |
HGMSC-300 | 300mm | 65/132 | 37kw | 150-180kg/h | 6000mm |
HGMSC-400 | 400mm | 65/132 | 37kw | 150-180kg/h | 6000mm |
HGMSCD-300 | 600mm | 65/132 | 37kw | 150-180kg/h | 8000mm |
HGMSC-600 | 600mm | 65/13 or 80/156 | 37 or 75kw | 150-350kg/h | 6000mm |
5,PVC WPC door machine:
Material:50% PVC+20% wood+20% caco3 +Chemical additives.
Product: Hollow Door panel, Cabinet Door, and other big profiles
Model | Door panel width | Door panel thickness | Extruder model | Motor power | Max extrusion capacity | Calibrating mould section |
HGMSM-800 | 800 | 20-50mm | SJMS 80/156 | 75kw | 350-380kg/h | 2 |
HGMSM-1000 | 1000 | 20-50mm | SJMS 92/188 | 110kw | 450-500kg/h | 3 |
HGMSM-1200 | 1200 | 20-50mm | SJMS 92/188 | 110kw | 450-500kg/h | 3 |
6, PVC WPC board machine:
Material: 60% PVC+10% wood +20% CaCo3+ Chemical additives.
Product: Solid door panel, Furniture board, partition wall panel, decoration solid panel
Model | SJMSB-80/156 | SJMSB-80/173 | SJMSB-92/188 |
Board thickness | 5-18mm | 3-30mm | 20-40mm |
Board width | 1220mm | 1220mm | 1220mm |
Max extrusion capacity | 350-380kg/h | 420-450kg/h | 500-550kg/h |
Motor power | 75kw | 90kw | 110kw |
Our workshop